Front of Dynoray

• AMPLITUDE Knob - Controls input volume.
• SIGNAL Switch - Select MIC or LINE.
• INTENSITY Switch - Select STUN (compression) or Disintegrate (distortion).
• THRESHOLD Switch - Select LOW, MEDIUM, or HIGH to set the level at which compression begins.
• DECAY Knob - Sets compression release time. Whereas the Level-Loc had only one release setting, the Dynoray provides a variable release control, offering settings from twice as fast to 1.5 times longer than its predecessor. This enables fine tuning to match song tempos and/or to create other unique effects.
• "DYNORAY" Indicator - Lights when the Dynoray is engaged. Shines at half brightness in STUN (compression) mode or DISINTEGRATE (distortion) mode. The light brightens with increased compression and distortion. It shuts off in BYPASS mode.
• PHASE Indicator - Lights when the PHASE reverse mode has been engaged.
• PHASE Switch - Reverses the phase (polarity) of the audio signal at the balanced XLR output. It does not affect the signal at the 1/4" unbalanced output.
• BYPASS Indicator - Lights when the BYPASS mode has been engaged.
• BYPASS Switch - Select SAFETY (bypass on) or DANGER (bypass off). The Level-Loc didn't use a true bypass. Audio still traveled the main signal path, but compression was significantly reduced. This made for a colorful mic preamp mode. The Dynoray offers the same type of bypass mode.
• POWER Indicator - Lights when POWER has been engaged.
• POWER Switch - Select ARM (on) or DISARM (off).

Pronounced uh - TOM' - ih - SAW' - nick

Click to see fully enlarged photo

Copyright © 2008-2009 Atomisonic Ltd. Co. All rights reserved.
Atomisonic, Dynoray, Dynamic Death Ray, & N4CR are pending trademarks of Atomisonic Ltd. Co.
Shure and Shure Level-Loc are registered trademarks of Shure Incorporated.
Atomisonic Ltd. Co. is in no way associated or affiliated with Shure Incorporated.